Description
Premium microfibre application cloths, ideal for applying Liquid Guard cleaner and primer and antimicrobial coating. Available in white or blue as singles or packs of ten.
Premium microfibre application cloths, ideal for applying Liquid Guard cleaner and primer and antimicrobial coating. Available in white or blue as singles or packs of ten.
Cloth weight | Blue 36g |
---|---|
Cloth size | 40 cm x 40 cm |
Colour | white or blue |
Pack size | 1 Blue, 10 Blue, 1 White, 10 White |
Danger
H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P240 Ground and bond container and receiving equipment
P305 + P351 + P338 IF IN EYE: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 +P313 If eye irritation persists: Get medical advice/attention
P403 +P235 Store in well-ventilated place. Keep cool.
P501 Dispose of contents /container in accordance with national regulation.
1) Use Pre-Clean
2) Apply liquid to the glass surface using trigger spray, polish in with application cloth until the surface is dry and free of visible streaks.
3) The coating is waterproof after 1 hour and fully cured after 24 hours.
Use a clean lint free cloth for application and wear gloves
Please Note: We only deliver to registered UK addresses with a valid Post Code.
We only supply to the UK from this site, contact us on + 44 (0)1691 654282 for delivery to Ireland and the rest of the world.
We send goods with an independent carrier on a 1/2 day delivery service. Please notify us if you have specific delivery requirements such as a restricted access. Failure to notify us of special delivery instructions can incur additional charges from our carriers.