Soft Top/Cabriolet Waterproofer
Soft Top/Cabriolet Waterproofer
£14.40
Soft Top & Cabriolet Waterproofer is a water-based spray-on product which is ideal for weatherproofing heavily or regularly soaked, soiled or stained fabrics such as cabriolet soft tops.
Coverage: 80 ml / m²
£ Cost / m²: £2.30
Durability: Coating bonds permanently to the textile fibre – reapply according to use and conditions
Description
Description
Soft Top & Cabriolet Waterproofer is a spray-on stain and water repellent textile coating for soft tops and cabriolets.
Soft Top & Cabriolet Waterproofer Performance:
- Strong water and oil repellence
- Helps prevent moss and greening build-up
- User friendly, water based, non-hazardous – no noxious fumes
- Environment: Ökotex certified (ECO Passport)
- Quick drying in approx’ 30 mins – fully cured after 24 hrs
- Long lasting – UV stable
- Highly repellent against organic/inorganic contamination including bird droppings
Soft Top & Cabriolet Waterproofer Applications:
- All fabric based soft tops
- Simple one coat spray application
- Can be applied to all textile upholstery.
Specifications
Additional information
| Chemical basis: | modified silicon dioxide |
|---|---|
| Layer thickness: | approx. 100 – 150 nm |
| Water resistance: | between 130° and 150° (20µl) |
| Oil resistance: | between 120° and 130° (20µl) |
| Slip angle: | not applicable |
| Chemical stability: | between pH 1 and pH 13 |
| Temperature stability: | 250°C permanent , 450°C peak |
| Weather resistance: | 3500h pursuant to ISO 11507 A |
| Wash stability: | 10-40 washes LTD according to (AATCC) Test Method 135, ECE formulation washing powder, non-phosphate reference |
| Transparency: | 100% |
| Salt water resistant: | yes |
| Storage stability: | 2 years |
| Temperature sensitivity: | 1°C to 30°C |
| Consumption: | 80 – 150ml/m² |
| Application: | The liquid is applied to the surface using standard trigger spray. If the substrate does not instantly absorb, roller application is advised to ensure uniform wetting. The coating is fully cured after 24 hours. |
| Standard sizes: | 500ml |
Hazards
Hazards
This product is non hazardous.
Application Video
Application Video
Application Instructions
Application Instructions
Preparation – Ensure surface is thoroughly clean and free of contamination.
Application:
1) The liquid is applied to the surface using standard trigger spray. Spray from approx’ 30cm.
2) If the substrate does not instantly absorb, roller or cloth application is advised to ensure uniform wetting.
Ensure surface is properly and evenly wet, but do not over-soak creating run-off or pooling.
3) The coating is fully cured after 24 hours.
Wear gloves
SDS Sheets
Please Note: We only deliver to registered UK addresses with a valid Post Code.
We only supply to the UK from this site, contact us on + 44 (0)1691 654282 for delivery to Ireland and the rest of the world.
We send goods with an independent carrier on a 1/2 day delivery service. Please notify us if you have specific delivery requirements such as a restricted access. Failure to notify us of special delivery instructions can incur additional charges from our carriers.
