Dura Lite Nano-ceramic

Dura Lite Nano-ceramic

£20.00

Dura Lite offers a full range of functionality including scratch resistance, easy-clean / stain repellence. It is easy to apply. and suitable for a broad range of non-porous surfaces.

Selected automotive and household applications can be found in the description tab below.

Coverage: 3-5 ml / m²

£ Cost / m²: £2.00 – £3.33 / m²

Automotive Durability: – 40,000 km 

Kitchen appliance temperature resistance: 500°C

 

Description

Dura Lite Nano-ceramic gives substrates water and dirt repellence with high level durability against mechanical abrasion.  It has the ability to adhere to synthetic and metallic substrates, while the organic groups generate non-stick benefits.

Dura Lite Performance :

  • Easy clean  / stain repellent –  5/5
  • Water and dirt repellence facilitates cleaning – 2-3 /5
  • Stain protection – Barrier properties of ultra-dense ceramic and quartz structures protect from dirt and contamination ingress. 5/5
  • Scratch resistance – Mild – 2/5
  • Corrosion prevention – Mild 2/5
  • UV-protection: Anti-ageing preserves valuable surfaces 3/5
  • Easy-to-apply –  Perfect finish is achieved without the need for special training 5/5
  • High temperature resistance – No change in characteristics under intensive heat (up to 500°C)
  • The perfect finish –  Colour enhancement and gloss bring outstanding aesthetics to surfaces.

Dura Lite Automotive Applications :

  • Car/motorbike body work
  • Alloy wheels
  • Plastics
  • Engine parts

Dura Lite Household Surfaces :

  • Work surfaces – granite, marble, quartz and laminates
  • Cookers – hobs, hoods
  • Fridges – doors and interiors
  • Stainless steel appliances

 

Additional information

Chemical basis:

modified pre-ceramic
Layer thickness:

approx' 600-3000 nm
Water resistance:

between 100° and 110° (20μl)
Oil resistance:

no
Slip angle:

< 20°
Temperature stability:

500°C permanent
Chemical stability:

between pH 1 and pH 13
Weather resistance:

3500h pursuant to ISO 11507 A
Durability (mechanical):

> 30,000 cycles pursuant to ISO 11998
Salt water resistant:

yes
Transparency:

100%
Storage stability:

1 year
Temperature sensitivity:

2°C to 30°C
Consumption:

3 – 5 ml/m²
Application:

drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Spread across the
surface and with a light polishing motion. After approx. 1-3 minutes visible streaks are removed with gentle polishing
motions. This high-performance coating is waterproof after 24 hours and fully cured after 7 days.
Standard sizes:

30ml

Hazards

Danger

H226 Flammable liquid and vapour.

H261 In contact with water releases flammable gases.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H332 Harmful if inhaled.
EUH208 Contains 3-aminopropyltriethoxysilane. May produce an allergic reaction.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P232 Protect from moisture.
P260 Do not breathe mist/vapours.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P402 + P404 Store in a dry place. Store in a closed container.
P501 Dispose of contents/container in accordance with national regulation.

Application Video

Application Instructions

Dura Range (Dura Lite, Dura VF and Dura HD)

Before applying Dura always ensure that surfaces are clear of contamination, thoroughly clean and dust free.

1) Drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate.

2) Spread across the surface with a light polishing motion.

3) After approx. 1-3 minutes any visible streaks are removed with gentle polishing motions.

4) This high-performance coating is waterproof after 24 hours and fully cured after 5-7 days at room temperature. Curing to water resistance can be reduced to 2 hours at 80°C and to 1 hour at 100-180°C.

Use a clean lint-free cloth for application and wear gloves

Dura Lite - SDS Sheet

Download

Please Note: We only deliver to registered UK addresses with a valid Post Code.

We only supply to the UK from this site, contact us on + 44 (0)1691 654282 for delivery to Ireland and the rest of the world.

We send goods with an independent carrier on a 1/2 day delivery service.  Please notify us if you have specific delivery requirements such as a restricted access. Failure to notify us of special delivery instructions can incur additional charges from our carriers.

Related Products