Refresh cleans and removes marks – and then conceals future deposits as a semi-permanent anti-finger print coating on brushed metal surfaces.

Coverage: 10 ml /m²

£ Cost / m²: £0.28

Durability: In busy households every 3 months or according to use


Refresh Performance:

  • Semi-permanent anti-fingerprint effect and stain elimination.
  • Used as a cleaner to remove stains/grease and as a coating to prevent further staining
  • Easy-to-apply: Clean by polishing then coat in direction of the metal grain
  • For structured or brushed stainless steel and other brushed metals

Refresh Benefits:

  • Cleans and removes marks – and then conceals during use
  • Prevents future deposits as a semi-permanent anti-finger print coating
  • Avoids the need to use inappropriate ‘oiling’ products to darken the surface



Additional information

Chemical basis:

modified silicon dioxide



Storage stability:

2 years

Standard sizes:




H225 Highly flammable liquid and vapour.
· Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P210 Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
P241 Use explosion-proof electrical/ventilating/lighting/equipment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P240 Ground/bond container and receiving equipment.
P233 Keep container tightly closed.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated
clothing. Rinse skin with water/shower.
P370+P378 In case of fire: Use for extinction: CO2, powder or water spray.
P403+P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container in accordance with local/regional/national/
international regulations.

Application Video

Coming soon 😊

Application Instructions

  1. Clean the surface with the product by highly polishing with pressure (only necessary in case of heavy stains)
  2. Apply a thick layer of the coating with a paper towel or cloth, with soft wiping movements (NO PRESSURE) in the direction of the grain.

After 24 hours the coating is ready-to-touch.

Use a clean lint-free cloth for application and wear gloves.


Refresh SDS Sheet


Please Note: We only deliver to registered UK addresses with a valid Post Code.

We only supply to the UK from this site, contact us on + 44 (0)1691 654282 for delivery to Ireland and the rest of the world.

We send goods with an independent carrier on a 1/2 day delivery service.  Please notify us if you have specific delivery requirements such as a restricted access. Failure to notify us of special delivery instructions can incur additional charges from our carriers.