Dura VF Nano-ceramic

Dura VF Nano-ceramic

£36.00

Dura VF Nano-ceramic, is the standard strength version of Dura. It offers a full range of functionality including scratch resistance, easy-clean / stain repellence. It is  easy to apply. and suitable for a broad range of non-porous surfaces.

Selected automotive and household applications can be found in the description tab below.

A full product specification and comparison can also be found in the description tab below.

Coverage: 3-5 ml / m2

£ Cost / m²: £3.60 – £6.00 /m²

Automotive Durability: 60,000 km

Kitchen appliance temperature resistance: 600°C

 

Description

Dura VF Nano-ceramic, gives substrates water and dirt repellence with high level durability against mechanical abrasion. It has the ability to adhere to synthetic and metallic substrates with a pencil hardness of 9H, while the organic groups generate the superior non-stick benefits.

Dura VF Performance :

  • Easy clean / water repellent – 5/5
  • Water and dirt repellence facilitates cleaning – 4/5
  • Stain protection –  Barrier properties of ultra-dense ceramic and quartz structures protect from dirt and contamination ingress.- 5/5
  • Scratch protection – 3/5
  • Corrosion prevention – 3/5
  • UV-protection, anti-ageing preserves valuable surfaces – 4/5
  • Easy-to-apply – Perfect finish is achieved without the need for special training 5/5
  • High temperature resistance –  No change in characteristics under intensive heat (up to 600 degrees)
  • The perfect finish –  Colour enhancement and gloss bring outstanding aesthetics to surfaces.

Dura VF Automotive Applications :

  • Car / motorbike body work
  • Alloy wheels
  • Plastics
  • Engine parts
  • Motorbike exhausts

Dura VF Household Surfaces :

  • Work surfaces – granite, marble, quartz and laminates
  • Cookers – hobs, hoods
  • Fridges – doors and interiors
  • Stainless steel appliances

Additional information

Chemical basis:

modified pre-ceramic
Layer thickness:

approx' 600-3000 nm
Water resistance:

between 100° and 110° (20μl)
Oil resistance:

no
Slip angle:

< 20°
Temperature stability:

600°C permanent
Chemical stability:

between pH 1 and pH 13
Weather resistance:

3500h pursuant to ISO 11507 A
Durability (mechanical):

> 30,000 cycles pursuant to ISO 11998
Salt water resistant:

yes
Transparency:

100%
Storage stability:

1 year
Temperature sensitivity:

2°C to 30°C
Consumption:

3 – 5 ml/m²
Application:

drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Spread across the
surface and with a light polishing motion. After approx. 1-3 minutes visible streaks are removed with gentle polishing
motions. This high-performance coating is waterproof after 24 hours and fully cured after 7 days.
Standard sizes:

30ml

Hazards

Danger
H261 In contact with water releases flammable gases.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H332 Harmful if inhaled.
EUH208 Contains 3-aminopropyltriethoxysilane. May produce an allergic reaction.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P232 Protect from moisture.
P260 Do not breathe mist/vapours.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P402 + P404 Store in a dry place. Store in a closed container.
P501 Dispose of contents/container in accordance with national regulation.

Application Video

Application Instructions

Dura Range (Dura Lite, Dura VF and Dura HD)

1) Drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate.

2) Spread across the surface with a light polishing motion.

3) After approx' 1-3 minutes visible streaks are removed with gentle polishing motions.

4) This high-performance coating is waterproof after 24 hours and fully cured after 7 days.

Use a clean lint-free cloth for application and wear gloves

Dura VF Nano-ceramic SDS

Download

Please Note: We only deliver to registered UK addresses with a valid Post Code.

We only supply to the UK from this site, contact us on + 44 (0)1691 654282 for delivery to Ireland and the rest of the world.

We send goods with an independent carrier on a 1/2 day delivery service.  Please notify us if you have specific delivery requirements such as a restricted access. Failure to notify us of special delivery instructions can incur additional charges from our carriers.

Related Products