GlassGuard™ and Pre-Clean Combi Kit

GlassGuard™ and Pre-Clean Combi Kit


Glassguard™ and Pre-Clean Combi Kit

Easy-clean glass coating for all types of glass and the following non-absorbent surfaces:-

  • Glazed ceramic tiles.
  • Stainless steel.
  • Polished porcelain and polished natural stone.

Creates a long-term non-stick easy-clean performance; anti-stain, anti-fingerprint.

Pack contains Pre-Clean surface de-greaser.

Coverage:  Approx’ 20 m² per 200 ml kit

£ Cost / m²: £1.50/ m²

Durability: 10 year functionality on un-abraded surfaces when maintenance instructions are followed.


The coating is crystal clear, UV stable, chemically inert and extremely durable, having both hydrophobic and oleophobic capabilities. It provides an easy-clean, low maintenance performance, reducing the need for cleaning by up to 70%, and is unaffected by extremes of temperatures from –20°C to +450°C.

GlassGuard™: Greenhouse and window glass performance –

  • Permanent bond that will not peel or flake, preserving the surface quality.
  • Does not reduce light transmission or optical values.
  • Not reliant on rainfall or UV to activate.
  • Leaves no tints or mirror effects on the glass.
  • Leaves no rainbow effect as rain is drying.
  • Silicone friendly.
  • Resists solvents, and not affected by silicone removers.
  • High abrasion resistance against organic and inorganic contaminants.
  • Resists high pressure cleaners and steam cleaners.
  • Resists alkali leach from concrete.
  • Repels bird droppings.
  • Resists salt water corrosion.

GlassGuard™ Benefits:

Does your easy-clean coating offer all these benefits?

  • Can be applied to all glass types.
  • Instant bonding.
  • Environmentally friendly, contains no irritants or HCFCs.
  • Reduces cleaning by up to 70%.
  • No special cleaners required.


GlassGuard™ can be applied to new glass or to restore existing surfaces to their original quality.

GlassGuard™ Care Instructions:

Periodic cleaning of the glass surface will be required according to conditions, and high-pressure/steam cleaners may be used.

  • Use any suitable household glass cleaning product.
  • Avoid cleaning agents containing heavy detergents.
  • Do not use abrasive scrubbing equipment for cleaning.
  • Residual marks are most likely to be caused by limescale in tap water as the result of spraying the roof or window using a hose, not by rainwater. Wash the roof to remove the marks, then wipe away excess water with a suitable rubber blade.

Additional information

Chemical basis:

modified silicon dioxide

Layer thickness:

approx. 100-120 nm

Water resistance:

between 105° and 115° (20μl)

Oil resistance:

between 80° and 85° (20μl)

Slip angle:

> 25°

Temperature stability:

250°C permanent, 450°C peak

Chemical stability:

between pH 1 and pH 13

Weather resistance:

3500h pursuant to ISO 11507 A

Durability (mechanical):

>20,000 cycles pursuant to ISO 11998

Salt water resistant:




Storage stability:

>2 years

Temperature sensitivity:

-3°C to 30°C


5 ml/m2


Drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Polish until the surface
is dry and free of visible streaks. The coating is waterproof after 1 hour and fully cured after 24 hours.

Standard sizes:

30ml, 200ml



H225 Highly flammable liquid and vapour

H319 Causes serious eye irritation

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking

P240  Ground and bond container and receiving equipment

P305 + P351 + P338 IF IN EYE: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P337 +P313 If eye irritation persists: Get medical advice/attention

P403 +P235 Store in well-ventilated place. Keep cool.

P501 Dispose of contents /container in accordance with national regulation.

Application Video

Application Instructions

Preparation – ensure surface is clean and free of contamination.

  1. Use Pre-Clean – spray and wipe to deep clean the surface using white cloth. Treat approx’ 0.25m2 at a time – to avoid quick evaporation.
  2. Apply GlassGuard to the glass surface using trigger spray, polish in with blue application cloth until the surface is dry and free of visible streaks. Treat approx’ 0.25m2 at a time – to avoid quick evaporation.

Wear gloves

GlassGuard™ SDS sheet


Pre-Clean SDS Sheet


Please Note: We only deliver to registered UK addresses with a valid Post Code.

We only supply to the UK from this site, contact us on + 44 (0)1691 654282 for delivery to Ireland and the rest of the world.

We send goods with an independent carrier on a 1/2 day delivery service.  Please notify us if you have specific delivery requirements such as a restricted access. Failure to notify us of special delivery instructions can incur additional charges from our carriers.