Multi-Purpose Brick & Stone Protector

Multi-Purpose Brick & Stone Protector

£64.50 – £322.50

Multi-Purpose Brick & Stone Protector is a high strength water based formulation offering appearance retention for any porous silicate substrate such as such as stone, concrete, terracotta and clay.  Once applied the indistinguishable protective layer 120 nm thick bonds with the inner pores of the substrate to leave a smooth, anti-stain, non-discolouring surface layer.

It offers protection against:

  • Moss, greening and algae build up on outdoor weathered surfaces (sandstone surfaces)
  • Damage from fat, grease and oil products
  • Colour seepage into substrate from building run-off
  • Abrasion and frost damage
  • Bird droppings and chewing gum adhesion
  • Repeated graffiti vandalism – offering 10 -15 cycles of colour removal before re-application*
  • Chemical attack including acrylic paint damage – allowing easy removal of solvent-based graffiti and solvent-free graffiti*

N.B. All 1 litre bottles are shipped with a tamper evident screw tops. Trigger sprays are available to purchase on the site if needed.

Coverage: Approx’ 12m² / litre

£ Cost / m²:  £4.58 -£4.42 

Durability: 10 years

* Specialist solvent removers may be required, depending on graffiti type – ghosting will be avoided. Ease of removal depends on graffiti agents used.

Description

Multi-Purpose Brick & Stone Protector is an appearance retention coating against the strongest elements -for use on all outdoor stone and concrete features and surfaces

Multi-Purpose Brick & Stone Protector Performance :

  • Water based,  free of VOC’s and fluorocarbons
  • Permanent bond – wears at the same rate as the substrate
  • Minimum 10 year functionality
  • Easy application – simply wet the surface, dries in approx’ 30 minutes
  • Walk on when dry
  • One coat application – therefore no risk of spoiling between coats
  • Highly UV and weather resistant  (EN 11507)
  • Dirt, water and oil repellent
  • Prevents moss, lichen and fungus
  • Breathable
  • Prevents efflorescence
  • Non-sacrificial – does not change surface characteristics*
  • Does not create ‘wet look’ surface
  • Graffiti protection – allows multiple removals without ghosting
  • 3-fold freeze/thaw resistance (EN1338)
  • Active ingredient: nano-scale quartz SiO2 (silicon dioxide)

Multi-Purpose Brick & Stone Protector Applications :

  • External brick walls
  • Rendering
  • Pathways and pavements
  • Uncoated concrete garage floors
  • Stone statues and garden features
  • Roof slates
  • Chimney stacks
  • Garden walls and entrance structures
  • Unglazed pottery

 

Multi-Purpose Brick & Stone Protector Surfaces :

  • Sandstone
  • Terracotta
  • Concrete
  • Concrete render
  • Slate
  • Brick
  • Flagstones
  • Concrete wall panels
  • Natural stone
  • Clay

* May slightly darken the shade of natural slates and certain concrete mixes

Additional information

Chemical basis:

modified silicon dioxide
Layer thickness:

approx. 100-350 nm
Water resistance:

between 130° and 150° (20μl)
Oil resistance:

between 120° and 140° (20μl)
Slip angle:

not applicable
Temperature stability:

250°C permanent, 450°C peak
Chemical stability:

between pH 1 and pH 13
Weather resistance:

3500h pursuant to ISO 11507 A
Durability (mechanical):

depending on substrate
Salt water resistant:

yes
Transparency:

100%
Storage stability:

2 years
Temperature sensitivity:

1°C to 30°C
Application:

The liquid is applied to the surface using standard pump spray systems. If the substrate doesn’t instantly absorb the liquid, roller application is advised to ensure uniform wetting. The coating dries quickly (depending on atmospheric conditions) and is fully cured after 24 hours. It can also be used after in-depth impregnation of the surface with Nanoflex® Infusion. The primary treatment should air-dry for 5 days before Multi-Purpose Brick & Stone Protector is used as a final coat.
Consumption:

80 – 200 ml/m²
Standard sizes:

1l, 5l

Hazards

This is a non hazardous product.

Application Video

Application Instructions

1) The liquid is applied to the surface using standard pump spray systems.

2) If the substrate doesn’t instantly absorb the liquid, roller application is advised to ensure uniform wetting.

3) The coating is will dry according to conditions after approx’ 30 minutes – and can then be walked on, and is fully cured after 24 hours.

Wear gloves

 

Multi-Purpose Brick & Stone Protector SDS Sheet

Download

Please Note: We only deliver to registered UK addresses with a valid Post Code.

We only supply to the UK from this site, contact us on + 44 (0)1691 654282 for delivery to Ireland and the rest of the world.

We send goods with an independent carrier on a 1/2 day delivery service.  Please notify us if you have specific delivery requirements such as a restricted access. Failure to notify us of special delivery instructions can incur additional charges from our carriers.

Related Products